engine suspension


  • Categories
  • Manufacturer
  • Price
    • -
Display per page
Sort by

Engine Mount Kit VW Golf / Corrado GTI & 16 V Competition

 

Vibra-Technics rubber-to-metal bonded products are designed specifically for high performance applications where a direct replacement for the standard mount is required along with a much higher level of engine control to cope with higher engine outputs and higher road inputs caused by fast driving.

739.00 *

Deliverytime

VW Golf, Jetta MK II

VAG750M - Front Engine Mount (8v & 16v)

The Golf front mount reacts a large proportion of the accelaration and overrun torque and has to carry a proportion of the powertrain weight. The original VW mount was always going to be a compromise! This Vibra-Technics design is a direct replacement for the original but allows only a fraction of the engine movement. Therefore there is none of the engine inertia forces throwing the engine back and forwards under throttle on and off conditions. The car has a much 'Tighter' feel and exhaust manifolds are not subject to high bending stress. In addition the level of noise and vibration transmitted to the cabin is not greatly increased.

 

Replaces OEM mount:- 191199279C, 357199279C, 1GD199279A

329.00 *

Deliverytime

VW Golf, Jetta MK II - Front Engine Mount

As VAG750M except this is approximately 3 times stiffer - for competition use where loads are higher and comfort is a low priority!

 

Replaces OEM mount:- 191199279C, 357199279C, 1GD199279A

269.00 *

Deliverytime

VW Golf, Jetta MK II - LH Rear gearbox mount

This LH rear mounting carries a proportion of the powertrain weight and reacts fore-aft and lateral forces. By combining a differential stiffness fore-aft to laterally and with some compliance vertically we are able to reduce the engine movement and still retain noise and vibration isolation. It also gives vastly superior comfort and isolation from engine vibration over inferior aftermarket urethane mounts.

 

 

129.00 *

Deliverytime

VW Golf, Jetta MK II - LH Rear gearbox mount

This LH rear mounting carries a proportion of the powertrain weight and reacts fore-aft and lateral forces. By combining a differential stiffness fore-aft to laterally and with some compliance vertically we are able to reduce the engine movement and still retain noise and vibration isolation. It also gives vastly superior comfort and isolation from engine vibration over inferior aftermarket urethane mounts.

 

 

149.00 *

Deliverytime

VW Golf, Jetta MK II - RH Rear Mount (inc G60)

This RH rear mounting carries a proportion of the powertrain weight and reacts fore-aft and lateral forces. By combining stiffness fore-aft and laterally with some compliance vertically we are able to reduce the engine movement and still retain noise and vibration isolation. It also gives vastly superior comfort and isolation from engine vibration over inferior aftermarket urethane mounts.

 

329.00 *

Deliverytime

VW Golf, Jetta MK II - RH Rear Engine Mount (inc G60)

As VAG970M except this is approximately 3 times stiffer - for competition where loads are higher and comfort is low priority!

239.00 *

Deliverytime

69.00 / set(s) *

In stock

* Prices incl. VAT, plus delivery